Javascript DHTML Drop Down Menu Powered by dhtml-menu-builder.com

Category "0"  3 Point Hitch Hardware

Cat-0 draw bar.JPG (25084 bytes)

Category "0" Draw bar with 5/8" ends

$35.98


ADD TO CART

Cat-0 top link.JPG (30007 bytes)

Category "0" Adjustable Top Link 
5/8" hole diameter. Closed length from hole center to hole center 10-3/4" and open is 16-3/8"
$25.52


ADD TO CART

Cat-0 Ball end.JPG (66375 bytes)

Category "0" Ball End 
5/8" ID 2" OD  1" wide. (used on each end of lift arms) must be welded to your own lift arms

$8.30


ADD TO CART

Cat-0 arm pin.JPG (22517 bytes)

Category "0" 5/8" Lift Arm Pin. (used to connect an implement to the tractor's lift arms or lift arm pivot pins on your tractor) Thread 5/8" NF 1-1/4" usable thread length.

$6


ADD TO CART

0.626 X 3in bent pin.JPG (74182 bytes)

5/8" Bent Pin 3" usable length
Can be used for attaching the 3 point's top link to the tractor and the attachment.
$4


ADD TO CART

0.5 X 3in bent pin.JPG (64667 bytes)

1/2" Bent Pin 3" usable length $3


ADD TO CART

0.625 X 4.25in hitch pin.JPG (51926 bytes)

5/8" Hitch Pin 4-1/4" usable length $5


ADD TO CART

Fluid Film

A Must for all Lawn & Garden Equipment and More

Mower Deck and Lawn Heath
One area health that should be checked regularly is under the decks of mowers. When dirt and debris (lawn clippings, etc.) build-up and aren’t removed they can quickly corrode the deck, shorten the life of the bearings in the spindles and also contribute to lawn disease. FLUID FILM can be applied over a damp surface and will leave a non-drying film, cutting off all oxygen from the surface and creating a barrier of protection that prevents all corrosion from occurring. Because of its non-drying characteristics, FLUID FILM also works as a release agent, helping to keep grass and debris from sticking, making clean-up a breeze. FLUID FILM also shines up metals and plastics, keeping equipment appearance sharp and professional. Fluid Film FAQ's  

Sticky Throttle/Choke Cables and all Linkages
Cables and linkages quite often become sticky and with just a few shots of FLUID FILM, they will un-stick and remain free as FLUID FILM doesn't dry up as other leading lubricants do. Fluid Film FAQ's  

Battery Terminals and all other electrical connections
Battery terminals often corrode and loose their connections. Clean any corrosion first and spray directly onto or into terminals. Because FLUID FILM doesn't dry up and is non-conductive, it blocks the air and moisture from reaching the connections thus keeping corrosion away. Fluid Film FAQ's  

Snow Plows and Snow Blowers
FLUID FILM makes a great non- stick surface on snow plows and snowblower chutes. From personal experience, spraying FLUID FILM in the rotating base joint of the snowblower chute, it will never bind from rust again. Fluid Film FAQ's 

From a Fluid Film customer "I wouldn’t trust anything other than FLUID FILM to protect my mowers and vehicles. It protects my trucks, trailers, and lawn mowers from rust and corrosion. I also love to use it as a lubricant in my leaf vacuum, on my garage door rollers, on the snow plow and snow blowers, or anything else that has moving parts. It works great to protect the underside of my mowers and greatly reduces grass buildup! The best part is that it is non-toxic so it does not hurt plant material when I use it on my mowers, hedge trimmers, etc."

$9.99


ADD TO CART